August 09, 2022 5 min read

Ahoy, landlubbers! Looking for a fun and easy DIY project to keep the kiddos entertained? Why not turn their mundane wardrobe into something fit for a pirate?

With just a few cuts and some strategic tie-dye, you can turn an ordinary t-shirt into a fearsome pirate shirt!

Cutting the T-shirt

Pirate shirts are all the rage these days, and what better way to get your child one than to cut up an old t-shirt and turn it into something new?

If you're not sure how to go about it, never fear! This guide will show you how to cut a t-shirt into a kid's pirate shirt in just a few easy steps.

First, lay the T-shirt out flat on a surface. Then, use the marker to draw a line across the T-shirt about four inches below the armpits. This will be the new bottom of the shirt. Next, use the scissors to cut along the line you just drew. Finally, cut two small slits into the bottom of the shirt on either side.

To conclude, start by cutting off the bottom hem of the t-shirt. You'll need about 6-8 inches of extra fabric, so make sure to leave enough.

Next, cut a 1-2 inch slit up the front of the shirt. Be careful not to make the slit too big, or else the shirt will be too loose. Next, cut the sleeves off of the shirt. You can make them jagged or straight, whichever you prefer. Now you'll need to make some cuts for the pirate shirt's neckline. Cut a V-shape neckline. Again, you can make it as jagged or straight as you like.

kids t shrits

The tools you need

If you want to make a kids pirate shirt out of an old t-shirt, you will need a fewsupplies. First, you will need a t-shirt that is a little too big for your child. You will also need a pair of scissors, a ruler, and a permanent marker. To start, lay the t-shirt flat on the surface.

Using the scissors, cut a horizontal line across the shirt about halfway down from the top. Next, cut vertical lines from the bottom of the shirt up to the horizontal line you just cut. Make sure that the vertical lines are evenly spaced. Once you have cut the vertical lines, you will need to make the sleeves.

Adding the Embellishments

It is so easy to make a kid's pirate shirt out of an old t-shirt! Just follow these simple steps. Cut a slit up the center of the t-shirt, starting at the bottom hem and stopping about midway up the shirt. Then, cut two curved lines on either side of the slit to create the armholes. Next, use fabric paint or markers to decorate the shirt with a pirate theme. Add a skull and crossbones, some swords, or anything else you can think of! Let the paint or markers dry completely before moving on to the next step.

Adding the Belt

Adding the belt is an important step in creating the perfect pirate shirt for your child. You will need a long strip of cloth to tie around the waist of the shirt. The belt should be tight enough to stay in place, but not so tight that it is uncomfortable. To tie the belt, start by threading one end through the belt loop on the back of the shirt.

Then, bring the belt around the front of the shirt and tie it in a knot. You can adjust the tightness of the belt by pulling on the ends of the belt. Now that the belt is in place, your child is ready to set sail on their next adventure!

Adding the Earring

A pirate t-shirt is not complete without an earing! Here is a quick and easy way to add an earing to your shirt: Cut a small hole in the fabric where you want to place the earing. Insert the earing through the hole and secure it on the other side with a piece of tape or a safety pin. That's it! You now have a fashionable pirate t-shirt that is sure to turn heads.

Adding the Eye Patch

Adding an eye patch to a pirate t-shirt is easy and only requires a few materials. First, you will need a black t-shirt and a black eye patch. You will also need a hot glue gun and glue sticks. To start, lay your t-shirt flat on the surface. Then, position your eye patch where you want it to go on the t-shirt. Once you have the eye patch in the desired location, use your hot glue gun to glue the eye patch in place. Now you have an easy and fun way to add an eye patch to a pirate t-shirt!


Every kid loves to dress up as a pirate, and what better way to do it than in a shirt they made themselves? It's easy to turn an old t-shirt into a kids' pirate shirt with just a few cuts and some creative embellishments. Here's how: Start by cutting the bottom hem off the shirt. Then, cut a slit up the center of the shirt, starting at the bottom and stopping about halfway up. Next, cut two sleeves off the shirt, just below the armpits. Finally, cut a neckline in the shirt, either in a V-shape or a U-shape.

diy shirt


How do you cut a T-shirt into a pirate shirt?

In order to cut a T-shirt into a pirate shirt, you will need to follow these steps: first, fold the T-shirt in half so that the sleeves are touching; then, cut off the bottom of the T-shirt; next, cut a curved line from the bottom of the T-shirt up to the armpit; finally, cut the sleeves off of the T-shirt. Once you have completed these steps, you will have a stylish pirate shirt that is perfect for any costume party or Halloween event.

How do you make a pirate shirt for kids?

Making a pirate shirt from an old t-shirt is a great way to upcycle an old piece of clothing. It's also a quick and easy way to dress up your child for a pirate-themed party or event. To make a pirate shirt, you will need an old t-shirt, a pair of scissors, and a bit of imagination. Start by cutting the bottom off of the t-shirt. Then, cut a slit up the front of the shirt. Next, cut the sleeves off of the shirt. Finally, decorate the shirt with felt, buttons, or other materials to create a pirate-themed design.

How do you make a pirate shirt step by step?

  • Step 1: Find a plain white T-shirt. If you don't have one, you can always purchase one from a local store.
  • Step 2: Grab some fabric markers or paint pens. Make sure to get a variety of colors so you can create a cool design.
  • Step 3: Start by drawing a simple skull and crossbones design on the front of the shirt. You can also add some other pirate-themed details like swords, eye patches, or hooks.
  • Step 4: Once you're happy with your design, let the ink or paint dry completely. That's it! You now have your very own pirate shirt.
Author - Fred Felton
Fred Felton          

Content Creator / Editor

Fred Felton is a copywriter, editor and social media specialist based in Durban, South Africa. He has over 20 years of experience in creating high end content. He has worked with some of the biggest brands in the world. Currently Fred specialises in the adventure watersports space, focussing on surf, kayak and rafting. He is also a keynote speaker and has presented talks and workshops in South Africa.

Also in Surf News

greatest surfer
Three of the Greatest Surfers of All Time

September 28, 2022 3 min read

wakeboard rope
How To Choose The Best Wakeboard Rope?

August 29, 2022 5 min read

scuba tank with diver
How Much Does a Scuba Tank Weigh

August 28, 2022 5 min read

Sign up for our Newsletter

Spin to win Spinner icon