How Do You Build a Free Stand Kayak Rack?

July 10, 2022 4 min read

If you are a beginner kayaker, you may be wondering how to build a free stand kayak rack. In this article, you will learn about using PVC, wood, or galvanized pipes. The most important thing to remember is to choose sturdy materials and follow the instructions. After all, you don't want your kayak to fall off the ground! So, keep reading to find out how to build a free stand kayak rack.


If you want to build a kayak rack, you can make it out of PVC. All you need are some pieces and some PVC cement. It should look like this. You can use the same material to build a rack for your other kayaks. You will also need some insulation tubes. These tubes are inexpensive and easily replaceable. Use duct tape or cable ties to attach them. Finally, weight the rack with water tubes or cinder blocks.

First, you will need some PVC pipe and plywood. You'll also need a handsaw and a pair of screws. You'll also need a PVC 90-degree elbow and T-fittings. You'll also need some PVC glue and primer. It's time to assemble the kayak rack! You'll have an impressive stand for your kayak within minutes!


A free-standing kayak rack is an excellent option for outdoor storage. Wood is a natural and inexpensive material, but it should be protected against the elements. The best wood for outdoor storage is Northern White Cedar, which is harvested in Michigan. Because of its natural oils, this wood is resistant to extreme cold and heat in winter. In the summer, it is also highly resistant to insects and is tolerant to the sun. When selecting lumber for the rack, look for pieces that are not prone to warping.

Free-standing kayak racks are constructed from wood or thin metal pipes. The first step is marking the width of your kayak on the wall. Next, drill two brackets per plank. Once they're drilled, secure the brackets to the wall and add foam insulation. Make sure to place plastic caps at the ends of the brackets to prevent the kayak from slipping off. Once you've fitted the brackets to the wall, you're ready to mount your kayak!


There are many benefits to building your own kayak rack. Not only will it save you money, but you can save time and effort by building your own kayak rack. To begin, you will need a few basic tools and materials. You will need 2x4s for the posts, plywood sheeting for the base, metal brackets, screws, washers, and bolts. Make sure you measure the length and width of each kayak so you can build it to fit the height of each kayak.

Steel is a good choice for a kayak rack, as it is sturdy. Make sure the arms are padded so that your kayaks won't get scratched. You will also want to use a durable material, such as powder-coated steel, to build your rack. It's also lightweight enough to make it portable. Some racks come with coasters, so you can put your kayak on top and use it in a different area. If you want to store your kayaks without wasting any space, you can build a DIY kayak hanger.

Galvanized Pipes

If you want to build your own kayak rack, then you can use plumbers' pipe to support the load. A single inch pipe is strong enough to support the weight of a single kayak. Moreover, you can easily adjust the position of the kayak on the rack, as long as the lashing straps are long enough. Galvanized pipes are more expensive than wood, but they are durable and versatile. They are also commonly used in creative DIY projects.

While making kayak racks may seem like a simple task, it is advisable to read up on the different types and designs before starting your project. You should consider the cost of materials and the lifespan of your kayak rack before deciding to purchase galvanized pipes. However, you can make your kayak racks with wood or cheap galvanized pipes, depending on the style and the materials that you choose.

Ratchet Straps

The simplest way to build a free-stand kayak rack is to use ratchet straps. These can be used to tie a kayak or cargo to the roof of your vehicle. To do this, pass the loose end through the buckle and cinch until secure. The rack should have a buckle on each end, so you'll have to be careful not to twist the kayak straps as you're passing them over the top.

Before you get started, be sure to know how to tie a trucker's hitch. Some racks are designed to be tethered to the truck, while others are free-standing. You should be able to do this by following these simple steps. First, make sure you've installed the crossbars in your vehicle and that they're level. Then, install the kayak carriers to the crossbars.

All-Natural Material

Using an all-natural material such as pressure-treated wood can provide an attractive and durable kayak rack. This material will not crack or chip, and will last for many years. Pressure-treated wood requires time to dry before staining. Additional coats of stain can be applied to the wood. After staining, it is important to clean the wood thoroughly. This free-standing rack will hold up to four kayaks and keep them off the ground. It will come with a chain and ABUS Diskus padlock for extra security.

The Malone Racks system is an excellent choice for kayak storage. Made of a powder-coated steel frame, this rack can hold two kayaks and two paddle boards. The rack is made to last for years. It also comes with padding and a tether for securing the boats. The three racks in this system are designed to be portable and require little maintenance. If you are concerned about the weight of your kayaks, the two-piece system can be shipped anywhere.

Also in Info

Men's Suits - Is it OK to Wear the Same Suit Everyday?

February 29, 2024 3 min read

How to Wash a Beach Mat

December 10, 2022 3 min read

Which Dog Life Jacket Is Best?

September 30, 2022 3 min read

Sign up for our Newsletter

Spin to win Spinner icon