How Often Should I Buy New Surf Wax?

August 16, 2022 4 min read

If you have a new surfboard, you might be wondering how often you should buy new surf wax. There is no single answer to that question, but the answer is likely to depend on the type of surfboard you have and how much wax you use. Typically, the wax bar will not include instructions, so it's up to you to figure out how to wax your board. Generally speaking, surf wax should leave small bumps on your board, as this improves the grip of the wax. In contrast, a smooth sheet of wax can feel nearly as slippery as no wax at all.

Hard Wax

If you want to keep your board smooth and grippy for years, you should consider changing the type of surf wax you use. There are several types, including tropical water wax, warm water wax, and hard water wax. Each type is designed for a different climate and is recommended for surfers who frequent hot oceans. To help you choose the right type of surf wax for your location, here are some important tips:

The frequency at which you need to apply wax to your surfboard will depend on how often you surf and how often you use it. If you surf several times a week, you'll want to keep a fresh coat of wax on your board. If you only use your board occasionally, you can use the same wax until the water temperature changes. Keeping the wax clean and dry is important because old wax weighs your board down and inhibits your performance.

Tropical Wax

The first thing you need to know is that not all surf wax is created equal. The type of wax that works best in your region should depend on the water temperature, and you should also consider the climate where you'll be surfing. Most surf wax manufacturers make products that are appropriate for warm, cool, and tropical water. A tropical wax won't work in cold water, and vice versa. You can also buy an over-the-counter wax that's designed for cooler water.

Some surf waxes contain scents or are biodegradable. But beware of synthetic surf wax. While cheap synthetic surf wax may be convenient, it's also harmful to the environment. Synthetic wax contains petrochemicals that are not biodegradable and can be toxic if consumed. Additionally, the small bits of surf wax that end up on the ocean floor can be eaten by marine life. As a result, these chemicals slowly leak into the ocean.

Basecoat Wax

If you're a regular surfer, you probably want to buy new surf wax regularly. If you surf several times a week, it's better to have a fresh thin coat of wax on your board. For occasional surfers, you can use the same wax until the water temperature changes. Old wax adds weight to your board and can negatively affect performance. Therefore, it's important to clean your board thoroughly after every session.

First, apply the basecoat wax to your board. This is the most important part of the process. This layer of wax is what you'll feel as you surf. Without a basecoat, the topcoat will rub off as you ride. But, a basecoat is a vital component of a surfboard, as it keeps the topcoat wax in place. By keeping the board waxed and protected, it will help you enjoy surfing more.

Using a Comb to Remove Old Wax

If you've ever wanted to get rid of old surf wax, you've probably wondered how to go about it. It's a fairly simple process, but it's still important to follow some simple steps to prevent causing any damage. First, you need to make sure the wax is warm, and you can do this by setting a heat lamp or hair dryer on low. After that, you'll need a comb to remove the wax from the deck.

Surf wax is best applied when warm water is the only option, but if you plan to surf in cold waters, you should consider removing the wax before traveling. Cold water wax will melt in the surfboard bag, and warm water wax will be better for a tropical destination. Once the wax is removed, the bits will be everywhere, including on your furniture and rugs. Using a comb to remove old surf wax can also help protect your rugs and furniture.

Removing Old Wax in the Sun

If you're sick of using a hair dryer to remove surf wax, you can simply place your board in the sun to soften and melt the old surf wax. Then, simply follow the same steps as if you used the sun. Alternatively, you can use hot water and a hair dryer to soften the wax on your board. Once softened, it's easy to scrape off.

Before removing old surf wax, you must first warm your board up in the sun. This process takes about 10 to 15 minutes. If this is not possible, you can also use a hair dryer set on low. Another alternative is using a heat lamp or hot water to soften the wax. You will need a scraper to remove the old surf wax. After you've removed the old surf wax, you can use a wax comb to remove any remaining residue.

Changing Your Surfboard Wax Regularly

The first step in ensuring that your surfboard's top coat stays fresh and grip is as optimal as possible is changing your surfboard's wax. Before applying the new wax, wipe off any old wax residue with a clean, soft cloth. Afterwards, criss-cross your board with a wax comb to remove any last bits of wax. Repeat the process as needed. And always remember to reapply your surfboard's top coat regularly.

The process of changing your surfboard's top layer requires two steps. First, you need to apply a base coat. To do this, simply place the thin side of the wax bar on the board. Then, make a series of circular motions, moving your hand after each circle. After the base coat is applied, you should apply the top coat. Remember to begin waxing the middle section of the board and finish by working your way down the board.



Also in Info

Which Dog Life Jacket Is Best?

September 30, 2022 3 min read

How Do You Measure a Dog for a Swim Vest?

September 30, 2022 3 min read

The Difference Between Float Coats and Dog Life Vests

September 30, 2022 3 min read

Sign up for our Newsletter

Spin to win Spinner icon