How Often Should You Wax Your Snowboard?

August 16, 2022 4 min read

Depending on the base of your snowboard, the answer to the question "How often should I wax my snowboard?" will vary, and there are some factors you should consider before you start. Snowboards with sintered bases are more likely to need frequent waxing. The reason for this is that sintered bases have a higher wax absorption capacity than extruded bases, which have tiny holes. A freshly waxed board will glide faster than one that's been in storage for a few days. If you want maximum speed from your board, waxing it frequently is recommended.

Snowboard Tuning

You may wonder how often to wax your snowboard. You should do so after every five days of snowboarding. More waxing may be required if you're riding in snow that has a high tree sap content or spring-like conditions. However, some conditions call for daily waxing. When in doubt, check the bottom of your snowboard for sap. If there's any, it's time to wax. But, if you're only out for a few days, waxing every week should be enough.

A complete waxing kit contains all the tools you need for a proper waxing job. It comes with sandpaper for polishing the edges, a fibertex pad, and metal scraper. Besides these cleaning tools, you'll need wax, a universal wax, and two ski brake retainer bands. And if you're not a pro, you can always consult Curated experts for free snowboard waxing tips.

Seasonal Waxing

While it's possible to wax your board at a local shop, it's also a good idea to do it at home, because it's a lot less expensive. It will also bring you a lot closer to that shred stick! Before beginning, make sure you have all the necessary supplies and workspace set up. Before beginning, use a citrus base cleaner to clean any debris from the base. Make sure to do edge tuning and base repairs if necessary.

The frequency of waxing depends on how often you ride your board. For those who ride several times a week, waxing your board every three to four weeks is enough. For those who ride less frequently, waxing should be done every season. This is because boards dry out even while they are not in use. It's important to give your board a good de-wax every few months to keep it looking great.

Applying Surf Wax

There are many options when it comes to applying surf wax to your board. Not all products are the same and not all conditions warrant the use of a particular wax. Choose a surf wax based on the temperature of the water you will be surfing. Warm water needs a hard wax while colder water needs a softer wax. Check the label of the surf wax to know which type of wax you need for the conditions you will be surfing in.

If you're planning to surf on cool or cold water, you should use a base coat first. You can apply a new top coat after every three months. Once the wax has set, you should remove the base coat and apply a top coat. The base coat should be removed every three months. You can use a comb to roughen up the existing wax and make it stick better. A wax comb is an excellent tool to use to make the wax more sticky.

Cleaning Your Board Before Waxing

Before waxing, clean your skateboard. Use a spray cleaner and wipe down the base of the board with paper towels. This will help protect the base from wax. After cleaning, wait for the board to dry completely. You can also use wax remover, which is a chemical solution to remove wax. Then, follow waxing instructions on the box. Let it dry for a few hours. If you plan to wax your board again, it is important to keep a few things in mind.

You can also wax your snowboard at home. You will need a work surface with a stable finish. A workshop bench will be ideal but even a regular coffee table will do. Avoid using your kitchen table as a work surface; the wax shavings and sharp edges of the snowboard may damage the surface. You can purchase specialist wax irons or use a regular domestic waxing iron. Make sure that you follow the instructions carefully.

Using a Clothing Iron for Waxing

Some snowboarders wonder if they need a special waxing iron. In reality, you can use any iron to wax your board. While some people think you need a specialized waxing iron, you can use an old clothing iron too. But you must make sure you don't use the same iron to iron your clothes after waxing your board. Using a clothing iron to wax your board can lead to the wax sticking to your clothes, so be sure to test it first!

To use a clothes iron for waxing your board, set the iron to a low setting. Start by holding it a few inches above the base of the board. Then, gradually increase the temperature to the point where the wax just melts. If the wax starts to smoke, lower the temperature. Then, hold the iron at least three inches above the base of the board. The tip of the iron should be pointing directly at the base of the board.



Also in Info

Which Dog Life Jacket Is Best?

September 30, 2022 3 min read

How Do You Measure a Dog for a Swim Vest?

September 30, 2022 3 min read

The Difference Between Float Coats and Dog Life Vests

September 30, 2022 3 min read

Sign up for our Newsletter

Spin to win Spinner icon