How to Remove the Gorilla Grip From a Surfboard

September 15, 2022 3 min read

When you're ready to remove the Gorilla Grip, there are a few things you need to do. First, make sure you remove traction pad residue, all glue, and wax. Next, use a crumpled paper towel to scrub any sticky areas. You can also try wax remover to clean up small dents.


If you are planning to remove the Gorilla grip on your surfboard and want to replace it with a new one, you may want to know how to remove it properly. Before you start, you need to clean and dry the surface of the board. Make sure to remove any excess glue and the old adhesive. You should also remove any big globs of gunk if possible. Although most cement cans come with a brush, you may find it easier to use a toothpick or a small artists' paintbrush.

You can also use wax remover to remove any glue residue left behind on the surfboard. You may also use a crumpled paper towel to scrub the sticky spots.


One of the most popular brands of surfboard accessories is Gorilla Grip. Their products combine functional core surf accessories with stylish design. They are most known for their leg ropes and tail pads, but they also offer a wide selection of styles and sizes. These products feature Aztec and Diamond Groove technology to enhance grip and stability.

However, you should not just chuck the Gorilla grip. It's a very sticky substance that will adhere to your board and create a slick surface. You can try removing it with a heat gun, but you should also be very careful. It might be difficult if you're not familiar with the process.

Traction Pad

The best way to remove the Gorilla grip from a board is to peel it off with your hands, like you would a jar label. Try to pull it off slowly, little by little. Be sure to keep your hands close to the board while you remove the traction pad so that you don't end up scraping off any of the sticky adhesive. Use paint thinner if necessary to loosen the glue.

If you can't find the Gorilla grip, try using a sharp knife to cut it off. Then, use a crumpled paper towel to scrub off the sticky residue. Repeat this process to remove the rest of the traction pad.

Removing It

The Gorilla Grip is one of the first surfboard deck grips, and it continues to lead the industry with functional and cutting-edge design. If you don't want to purchase a new one, there are a few things you can do to remove the Gorilla grip. First, you should soften the wax with a hair blower. Next, you should remove it using a wet rag.

If the traction pad is too loose to be peeled, use a knife and a little contact cement. Then peel back the traction pad and wipe off any excess glue. Make sure the board is clean and dry before attempting to reinstall the grip.

Re-Adhesive It

If the Gorilla grip on your surfboard is coming off, you can easily re-adhesive it by simply peeling back the adhesive pad. Alternatively, you can use contact cement to adhere the grip back to the board. Be sure to follow the instructions carefully and thoroughly. Apply the glue carefully and evenly, and don't forget to allow the adhesive to dry thoroughly.

When re-adhesing the grip, it is important to use a high-quality glue. White Gorilla Glue is 100% waterproof and is safe for both indoor and outdoor use. This glue adheres to a variety of materials, including foam, stone, ceramic, and metal.

Also in Info

Men's Suits - Is it OK to Wear the Same Suit Everyday?

February 29, 2024 3 min read

How to Wash a Beach Mat

December 10, 2022 3 min read

Which Dog Life Jacket Is Best?

September 30, 2022 3 min read

Sign up for our Newsletter

Spin to win Spinner icon