Is Surfboard Cord Thickness Important?

August 16, 2022 4 min read

Are you interested in learning more about the importance of surfboard cord thickness? Then you've come to the right place. Here you'll learn how to choose a surfboard leash, including length, thickness, and swivel. Read on to discover how to choose the right cord for you. Also, make sure to read our other articles to learn more about surfing leashes.

Choosing a Leash

Choosing the right leg rope is an essential part of surfing, and there are a variety of different options available. Leashes are designed for different lengths and thicknesses, and are used when a surfer needs extra control and security while surfing. Using the proper leash can improve the surfing experience and ensure your board stays in place during your surf session. Consider the following factors when choosing the leash for your surfboard:

Leash length is also important. While beginners tend to opt for the longest cord length, the shorter leash length is better for advanced surfers. The longer leash length will add unnecessary drag to the board while surfing, and the shorter the leash, the more likely the board will bounce back. However, if the leash is too short, it can make surfing uncomfortable or impede speed. So, experiment with leash lengths until you find the one that fits best.

Leash Length

Choosing the right length and thickness of your leash is crucial for surfing. Thinner cords are more flexible and will reduce drag in small waves, while thicker cords are more durable and can withstand bigger waves. The thickness of your leash should depend on your board and wave height. A standard 6mm leash will work well for most surfers, but a thinner leash may be necessary for performance surfing.

A regular surfboard leash is the most common type, and is made of a thin cord. It will prevent unexpected strain and fall. However, competition leashes are too thin for everyday use. Longboard leashes are 9' or 10' long to accommodate the movement up and down the board. Some longboard leashes come with a calf cuff so that the cord does not come in contact with your foot.

Leash Thickness

The leash's thickness is an important factor. Competition leashes are typically 3/16" thick, while regular leashes are approximately 6mm thick. The thickness of the leash's cord depends on how large the waves are and whether the surfer is a beginner or experienced surfer. In general, thicker leashes are better for bigger waves, but if you don't know how big the waves are, stick with the standard thickness of 6mm or 8mm.

Another consideration is the length of the leash. The ideal length is between one and two feet longer than the board's length. However, if you're unsure about the exact length of your surfboard, you can always get a longer leash to be safe in case of a wipeout. For surfboards up to seven feet long, you should choose a leash that's around six feet in length.

Leash Swivel

When buying a surfboard leash, you will need to consider the length, width, and swivel. Some leashes feature a swivel section next to the rail saver or ankle strap. Swivels can have one or two bearings, or none at all. Swivels are important because they prevent the leash from tangling and twisting.

To protect yourself during a wipeout, you should purchase a leash with a length longer than your board. If you're surfing a large wave, you'll need a long leash with a cord thickness of around 7mm. If you're on a smaller wave, it may be okay to use a thinner leash. On the other hand, if you're a beginner or a less experienced surfer, a leash with a thinner cord will allow you to stay in the water longer.

Rail Savers

A good leash includes a rail saver and velcro strap to attach the surfboard to the leash. The leash string should pass through the rail saver and be snug enough to keep the surfboard from swinging. Make sure the rail saver and leash string are in line with each other to avoid any snagging on the board. When the string is too thick, it may cause stress on the surfboard's rail.

A rail saver attaches to the end of the surfboard leash with velcro or sewn-in strap. A thick rail saver will tug on the tail of the surfboard when waves pull it. A thick rail saver will help prevent the leash from slicing the tail. A thin rail saver won't protect the tail as well. A thin one may be unnecessary, but a thick rail saver will prevent your surfboard from shredding in the waves.

Choosing a Swivel

When you're choosing a surfboard leash, there are a few things you should keep in mind. One is the thickness of the cord. While thicker cords are better for longboards and SUPs, thin ones can easily get tangled. Also, choose a swivel that allows you to turn the surfboard leash without having to hold on to it yourself.

The cord used to hold the surfboard is made from a high-quality polyurethane material, making it durable and long-lasting. The cord thickness is important because it determines how far the surfboard leash stretches in the water. Swivels are also useful for surfboard leashes because they prevent the cord from tangling and reducing drag. You should choose a swivel with a cord thickness of at least 1 inch, depending on the thickness of your surfboard.



Also in Info

Which Dog Life Jacket Is Best?

September 30, 2022 3 min read

How Do You Measure a Dog for a Swim Vest?

September 30, 2022 3 min read

The Difference Between Float Coats and Dog Life Vests

September 30, 2022 3 min read

Sign up for our Newsletter

Spin to win Spinner icon