If you want to take your electronics on a dive, the water resistance of your watch is important. Read our article about diving with a 100m watch. However, how can you test a watch's water resistance? Here are some tips on how to preserve an electronic device's water resistance:
The need for electronics water-resistant has increased with the increasing use of electronic devices in the outdoors. As a result, many international standards have been put into place to test electronics' water-resistance. One such standard is the International Electrotechnical Commission's Ingress Protection (IP) rating, which establishes the level of protection the device has against water and dust. But how does it relate to your own needs?
IP, or Ingress Protection, rating is the most important consideration when buying an electronic device. When purchasing a new device, always check the IP rating. This rating is not a guarantee of water-resistance, but it does indicate how the device has been tested to determine its water-resistance ability. In the event of an accidental drop, a device may not survive this test. However, a device with an IP rating of seven or higher is considered to be safe against water intrusion and water damage.
While you're out on the water, don't leave your electronics in the water. While many of them are completely waterproof, it's possible for them to get damaged by water. The best way to protect them is to keep them out of direct sunlight. The best way to protect them from water damage is to get a waterproof case for your phone. This case will protect your electronic device from water damage and still let you operate it. Just be sure to keep the case out of direct sunlight and avoid storing it in a place where it will get destroyed by heat.
If you want to keep your phone safe from water, you should buy an IP68 or higher rated smartphone. IP68 is the standard for waterproofness and is a universal measurement. If your smartphone is IP68, it's water resistant up to 1.5 meters and protected from dust. You can find out if your model is certified or not by looking on the packaging. If you are worried that your phone won't survive water damage, don't go diving with it.
To determine a watch's water resistance in diving, you must first understand the standard requirements for testing watches. While the standard doesn't mandate a specific depth rating, it does establish criteria for water resistance testing. The purpose of the standard is to eliminate the ambiguity surrounding watch use in water by creating a standard testing procedure. Nonetheless, it leaves significant latitude for the watch manufacturer to perform additional tests as needed. Check out the depth you can go in with 100m watch.
There are essentially two methods of testing water resistance in diving. One involves immersing the watch in a solution that is equal to the salt content of normal seawater. The watch must then be kept in the solution for 24 hours. Any changes should be checked for accuracy. Additionally, the workings of any moving parts must be checked to ensure they are functioning properly. Another method focuses on the solidity of the strap and the crystal. This involves applying a force of 200 N to the strap and 45 lbf to the attaching points. Both methods can cause some damage to the watch, so a water resistance tester is essential.
Protecting electronics from the elements is important when diving and boating. Plastic bags, such as those sold in marine supply stores, can be used to protect electronics from water and salt air. If waterproof plastic bags are not available, consider using a plastic grocery bag. However, make sure the electronics you're protecting can be used through them. Other methods include wrapping electronics in balloons. These methods do not prevent electronics from being damaged by water and salt air, but may leave a white residue behind. Electrical tape and Saran wrap can also protect your electronics from limited water damage. How is water resistance determined? Read our articles to find the answer.
To protect your electronic device, there are a few general rules to follow. For instance, you shouldn't expose ports, dials, or buttons to water. Extreme temperature may damage the sealant and cause a leak. Even if the label says "waterproof", it is not 200 meters--it's limited to one meter. Generally, it's better to follow the manufacturers' guidelines.