How to deflate your paddle board safely and securely is an essential question for any paddleboard owner. Extreme weather and temperature changes can weaken a surfboard. In order to avoid any potential damage, deflating your surfboard can help release trapped air and give your stitches a rest. Read on to learn more. And don't forget to store your paddle board properly.
Before paddling your paddle board, you should know how to grip it. Pushing your feet into the paddle and keeping your knees bent will help you stand more steadily. While paddling, your arms should be at your sides, and your palms should face the horizon. This position will allow you to control your board by shifting your weight over your hips. Your gaze should be on the water, rather than your feet.
One of the most important safety measures to take with an inflatable paddle board is properly deflating it after each use. Proper deflation will increase the life of your paddle board and reduce pressure changes during transport. Luckily, an air pump makes this easy, and it is included with your paddle board purchase. Nevertheless, you should use it with care, and make sure it is fully deflated before storing it.
Safety of deflating paddle board after use begins with removing any debris from the valve area. If your paddle sup board has a dual chamber, you can follow the same steps. To deflate your board, push the valves down and turn them anti-clockwise. When you're finished, fold it up and store it for future use. In case of a leak, deflating it should be done before heading to the beach or inclement weather.
Whenever you have finished using your paddle board, you should store it properly. There are a few important things to consider. Paddle boards should be stored in a cool, dry place, away from moisture. Temperature is also a factor, as a board that is too hot or too cold will wreak havoc on the material. Generally, paddle boards should be stored in a temperature range of 40 degrees Fahrenheit to 85 degrees Fahrenheit. Direct sunlight can also damage an inflatable board, as it will melt the glue around the valves.
Inflating and deflating paddleboards requires a proper pump. Some pumps are one-way, while others are two-in-one. In order to deflate the paddle board, you first need to turn the air-releasing valve on the pump to its deflating mode, and then connect the hose to the deflation valve. If the valve is obstructed, you can turn the valve counter-clockwise to open it.
If you have used your paddle board, it's important to deflate it properly after each use. Many paddle boards have valves that lock in air, so removing the air is an easy way to deflate them. Some pumps also have a valve cap. To use the pump provided with your paddle board, set the hose to deflation mode and connect it to the handle. If your paddle board doesn't have a valve cap, follow the same steps as above.
Paddle boards can be secured and locked with the use of a security cable. Paddle boards with a security cable are easier to lock than others. The cable should be twisted so that it does not create a wind noise. Stand-alone locking devices can be easily installed. If you do not have a security cable, you can purchase a steel-core security strap for your board. These straps can be secured to your vehicle rack or another fixed object.